Rabbit OP7100 User Manual download pdf (Page 20)

14 eDisplay (OP7200)

2.6 PONG.C

You are now ready to test your set-up by running a sample program.

Find the file PONG.C, which is in the Dynamic C SAMPLES folder. To run the program,

open it with the File menu (if it is not still open), then compile and run it by pressing F9 or

by selecting Run in the Run menu. The STDIO window will open on the PC and will dis-

play a small square bouncing around in a box.

This program shows that the CPU is working. The sample program described in

Section 5.2.3, “Run the PINGME.C Demo,” tests the TCP/IP portion of the board.

2.7 Where Do I Go From Here?

NOTE: If you purchased your OP7200 through a distributor or Rabbit partner, contact

the distributor or partner first for technical support.

If there are any problems at this point:

• Use the Dynamic C Help menu to get further assistance with Dynamic C.

• Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/

and at www.rabbit.com/forums/.

• Use the Technical Support e-mail form at www.rabbit.com/support/.

If the sample program ran fine, you are now ready to go on to explore other OP7200 fea-

tures and develop your own applications.

The following sample programs illustrate the features and operation of the OP7200.

These sample programs can be used as templates for applications you may wish to

develop.

Chapter 3, “Subsystems,” provides a description of the OP7200’s features, Chapter 4,

“Software,” describes the Dynamic C software libraries and introduces some sample pro-

grams. Chapter 5, “Using the TCP/IP Features,” explains the TCP/IP features.

Basic Keypad Touchscreen

BUFFLOCK.C

CONTRAST.C

PRIMITIVES.C

SCROLLING.C

TEXT.C

KP_16KEY.LIB

KP_ANALOG.C

KP_BASIC.C

KP_MENU.C

BTN_16KEY.C

BTN_BASICS.C

BTN_KEYBOARD.C

CAL_TOUCHSCREEN.C

RD_TOUCHSCREEN.C

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 171 172

No comments

Rabbit OP7100 User Manual Page 20